FAQ: FEEDING AND CONVEYING


Model Selection


One customer wants to convey around 80 Kg/hr of crushed PE from one factory to another, the material must go up 10 mts and 11 mts horizontally, could you please suggest us the suitable hopper loaders for this application.


SAL-2HP-UG+SHR-12U can meet this application



Please confirm that this autoloader is suitable to convey hot PET granules with temperature up to 160℃?


Of course standard models just do it. customers could choose suitable loaders according to capacity and distance of conveying. It is suggested to use conveying pipe made from stainless steel.



Please clarify if the SHR-P-30U-2 includes a hopper or not. If not, please confirm if the customer needs to fix it on top of the hopper of his extruder.If yes, please confirm total height.


The total height of SHR-P-30U-2 without the bottom hopper (optional part) is 1500mm.
Customer need to confirm if the mounted hole diameter of hopper on the extruder is same like that of the SHR-P-30U-2. if yes, the SHR-P can install directly on top of the hopper of extruder. if not, customer needs to order the bottom hopper (named material collecting hopper) with height 423mm.



How to select the suitable loader?


The safety margin of 20% should be considered when selecting specific models.
The conveying distance and the form of materials should be taken into account.
If the distance is in the range of us standard test and the form is similar to the tested material, we can ensure that the throughout can reach the output of the catalog indicated.
Operational Doubts



One customer wants to convey around 80 Kg/hr of crushed PE from one factory to another, the material must go up 10 mts and 11 mts horizontally, could you please suggest us the suitable hopper loaders for this application.


SAL-2HP-UG+SHR-12U can meet this application



Please confirm that this autoloader is suitable to convey hot PET granules with temperature up to 160?


Of course standard models just do it. customers could choose suitable loaders according to capacity and distance of conveying. It is suggested to use conveying pipe made from stainless steel.



Please clarify if the SHR-P-30U-2 includes a hopper or not. If not, please confirm if the customer needs to fix it on top of the hopper of his extruder.If yes, please confirm total height.


The total height of SHR-P-30U-2 without the bottom hopper (optional part) is 1500mm.
Customer need to confirm if the mounted hole diameter of hopper on the extruder is same like that of the SHR-P-30U-2. if yes, the SHR-P can install directly on top of the hopper of extruder. if not, customer needs to order the bottom hopper (named material collecting hopper) with height 423mm.



How to select the suitable loader?


The safety margin of 20% should be considered when selecting specific models.
The conveying distance and the form of materials should be taken into account.
If the distance is in the range of us standard test and the form is similar to the tested material, we can ensure that the throughout can reach the output of the catalog indicated.
Trouble Shooting



One customer wants to convey around 80 Kg/hr of crushed PE from one factory to another, the material must go up 10 mts and 11 mts horizontally, could you please suggest us the suitable hopper loaders for this application.


SAL-2HP-UG+SHR-12U can meet this application



Please confirm that this autoloader is suitable to convey hot PET granules with temperature up to 160℃?


Of course standard models just do it. customers could choose suitable loaders according to capacity and distance of conveying. It is suggested to use conveying pipe made from stainless steel.



Please clarify if the SHR-P-30U-2 includes a hopper or not. If not, please confirm if the customer needs to fix it on top of the hopper of his extruder.If yes, please confirm total height.


The total height of SHR-P-30U-2 without the bottom hopper (optional part) is 1500mm.
Customer need to confirm if the mounted hole diameter of hopper on the extruder is same like that of the SHR-P-30U-2. if yes, the SHR-P can install directly on top of the hopper of extruder. if not, customer needs to order the bottom hopper (named material collecting hopper) with height 423mm.



How to select the suitable loader?


The safety margin of 20% should be considered when selecting specific models.
The conveying distance and the form of materials should be taken into account.
If the distance is in the range of us standard test and the form is similar to the tested material, we can ensure that the throughout can reach the output of the catalog indicated.
Maintenance



Custom has bought several SAL-800G,but sometimes they need to convey raw material and regrind so it is need to clean the filter.SAL-800G working with ACF-1 can separate the dust from return air according to the content. Please explain the function of ACF and provide the corresponding information?


Main function of ACF-1 is a cyclone separator, which can separate the dust from the air by cyclone action.



Other Issued


Can the material of conveying pipe change to stainless steel? If yes, What is impact on the machine? Does the material level of standard spring comply with standard of food level?


There is little impact on machine if conveying pipe is made from stainless steel, but it can not be installed with curve.
Our standard material of spring can’t reach food grade now.



I want to attach this old type PCB on latest SAL-U hopper loader, is it OK or not?


There is a contactor on the carbon brush motor of this old PCB SAL-U, it should be removed when used. We have a detail introduction on ePaper issue 03.



What is the motor speed, power and electric current of SIC-800G2? And how about SVM-100/SVM-200?


SAL-800G2 Motor speed 2880r/min Power1.5KW Rated current 3.5A
SVM-100 Motor speed 1420r/min Output speed 80RPM Power3.0KW Rated current 6.8A
SVM-200 Motor speed1420r/min Outlet speed 80RPM Power 5.5KW Rated current 12A