SHD series “Standard” hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series, hot air blows evenly from bottom to the top (both SHD-800 and SHD-1000 have down-blowing air pipe and accessible door for easy material clearance) of the hopper with capacity ranging from 12~1,000kg, Optional 24-hour timer is available for each model.

SHD-U series hopper dryers adopt hot air down-blowing design and use stainless steel made material hoppers to avoid contamination. With this design, they are also ideally suitable for use with honeycomb dehumidifiers to dry engineering plastics. There are 25 models available, ranging from 20 to 8000 liters.

SDL-U series of drying loaders combine conventional hot air drying and two-stage conveying functions into a compact unit. It is particularly suitable for using with the big tonnage moulding machines when height restriction is concerned at the workshop. The SDL-U series has a unique function of two-stage conveyingf that can transport both raw material to its own drying hopper and dried material to the moulding machine.

For cabinet dryers, materials to be dried are placed on the stainless steel made moveable material trays. During operation, process air will flow to heating wire and be heated up to required temperature, then flow through a manifold with evenly scattered holes. Moisture air is sent out through air exhaust port. It is designed to achieve an even drying effect.

SD-H series honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40℃.This series comprises 15 models of honeycomb dehumidifiers, the largest of which can provide dry air up to a quantity of 4,000 m3/hr.

Shini "optical" compact dryers combine the function of dehumidifying, drying and two-stage conveying into one single unit, specified for the production of "optical class" products, such as lenses, LCD backlight panel, compact discs etc. They feature honeycomb rotor for dehumidifying, ensuring continuous and constant low dew-point. Under ideal conditions, it can provide lower than -40℃ dew-point dehumidified air.

SDD series dehumidifying dryers combine dehumidifying and drying systems into a single unit. They have many applications in processing plastic materials, such as PA, PC, PBT, PET etc. All models feature SD-H honeycomb dehumidifiers with built-in process heater and insulated drying hopper. Under ideal conditions, it can provide dehumidified dry air with a dew-point lower than -40℃.

SCAD integrates plastic drying and conveying into one unit, which is especially applicable to vertical injection moulding machine and stand injection moulding machine when limited by height of the workshop. The SCAD adopts positive compressed air to load material so it has low noise level and low energy consumption. Euro design features classy appearance and easy for maintenance. The hot and dry air is formed by sending outfitted compressed air into pipe heaters. Unique up-blowing air pipe design makes hot air evenly spread out to achieve best drying effect.

SCR closed-loop crystallizers are used for constant crystallization of un-crystallized PET regrinds or pellets. Processed materials can then be dried and dehumidified directly. Crystallized materials can be conveyed to material storage bin or into drying hopper.

"Stannardd" Self-contained SAL-330 / 360 series adopt single phase carbon brush motor with superior suction power and easy installation. It is particularly suitable for conveying new materials.
SAL-430 / 460 series use a three phase inductive motor with low noise level and long service life. It also has an automatic motor reverse cleaning device.

SAL-G series “Standard” separate-vacuum hopper loaders are suitable for conveying material over long distance. SAL-700G/800G/800G2 are for one to one combination, while SAL-900G/900G2 are for one to two combination. All models adopt stainless steel hopper to ensure no contamination to raw material. High efficiency high pressure blower features light weighted, durable, great suction power, easy installation and operation.

SAL-U series self-contained hopper loaders are Euro design with stainless steel hopper to avoid material contamination. In addition, it has an attractive appearance, a sound-proof motor cover to reduce noise level and a top handle to enable convenient movement. Also the remote operation has been realized by using a detachable control panel.

SAL-UG series separate-vacuum hopper loaders are based on the established design and now feature more attractive appearance, better performance, and improved ease of operation. The whole range comprises of seven models equipped with vacuum blower from 1 to 15 HP. Economy models can be offered on request.

SSC series flexible screw feeders adopt motor-driven screws for raw material conveying, applicable to convey regrinds, virgin materials, powders and their mixtures with features of low noise level, easy installation and maintenance. Three models of SSC-40/50/65 available with max. horizontal conveying capacity of up to 1,200kg/hr. Besides using in plastic industry, they can also apply in food, chemistry, pharmacy and other various applications.

The rotary valve is designed to feed powder materials and is the most precision feeding machine. Especially, it will get the optimum efficiency in the pneumatic conveying system or differential pressure condition. SHINI is devoting herself to create higher pressure tightness seal, satisfying higher demands, providing better quality.

SPV-U series proportional valves mix regrind and new materials in a proper proportion, and then send them back to the moulding machine to achieve a proportional mixing and loading effect. It features directly mounted on loaders or mounted on the pipeline. Besides, it is applicable to Euro loaders and has to equip control box to perform when in other situations.

SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master- batch or additives. A gear motor with gear ratio of 38 : 1 or 75:1 is coupled to a dosing screw of 12, 14 or 16mm diameter to give a total of six models with output. ranging from 0.1~32kg/hr. Double color dosers can be assembled from two single color dosers if required. Five components automatic mixing can be realized if customers adopt four color dosers.

SGB series gravimetric blenders can be used in the fields of injection moulding machines, blow moulding machines and extrusion lines for proportionally precise mixing of several types of material. This series machines adopt SIEMENS PLC controller and latest ingredients calculation methods.The machine is controlled by an advanced microprocessor with a digital display that is simple to calibrate. The self-compensation and calibration function ensure accurate material dosing percentages. A high precision electronic weighing scale is used to ensure precise weighing of every batch and ensure accuracy to ± 0.1%~ 0.3%. There are 42 models available to be selected based on various materials and throughputs. (This series are not suitable for powder and sheet pieces weighing)

To achieve the aim of mixing material, screw blades are used to generate vortex. Materials are sucked towards mixing screws at the center of hopper bottom by vortex, then materials whirl upward to the top and fall down so that the evenly mixing can be fulfilled in a short period.

SVM-U is mainly used for mixing plastics as raw materials, masterbatch and recycled materials. SVM-U can not be used dealing with plastic powder and all kinds of foods, chemicals, and inflammable, explosive and volatile materials. Bulk density should be taken into account when the dimension of material is uneven or in other forms.

SDS is suitable for removing dust in plastic materials such as PET, PA, and PC etc. It is not used for dealing with plastic recycled materials. Please inform us as the material need anomalous temperature or close-loop circulation after drying. SDS-100/250 is only applicable for the dust-separating of virgin material; SDS-500 is applicable on the floor mount.

SMS series metal detecting separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminium, lead, tin, and so on. Its principle is when metal impurities pass through it, electrical detector can send a signal to control board to start valve to discharge the impurity materials. Pneumatic discharging system takes little space and ensures good performance. It can be installed directly on injection moulding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals. There are three models of the series: SMS-35~70, processing capacity can reach up to 400L/hr~5,000L/hr to meet any specific requirement.

STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimised design, It can reach a maximum of 200℃ and the OMRON temperature controller can maintain an accuracy of ±1℃.

STM-E (WE) series are applicable for heating up the moulds and maintaining temperature, and they also can be used in other similar applications. Firstly, these series adopt different cooling methods to cool down mediums, then mediums are conveyed to the moulds after pressurized by pump and heated up by electrical heated tube. The optimal design renders water be heated up to 120℃ and oil up to 150℃.

STM-W series water heaters have both standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by either indirect cooling (For high temperature and high temperature plus pressure models) or direct cooling (For standard models). It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ±0.5℃.

STM-WF series "Large Flow" water heaters are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by direct cooling. It is then pressurized by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ±0.5℃.

STM-W/O series of dual-purpose heaters are mainly used to heat up the mould and maintain its temperature, although they can be also used in other similar applications. High temperature water or oil return from the mould is cooled by indirect cooling and then sent to the pipe heaters via high - pressure pump for heating to a constant temperature. This unique design allows user to choose between water and oil as heat transfer medium. With our optimized design, the OMRON temperature controller can maintain an accuracy of ±0.5℃.

SFR series water flow regulators are designed to work with mould heaters, water chillers and cooling towers, which can be connected to more than one mould connectors. They have the function like temperature and flowrate displays, flowrate control in order to meet the requirement of different working conditions. Modularized combination ensures convenient installation and maintenance. It is a necessary device for modern plastic industry to improve its moulding efficiency.

SIC-W/A series are applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling.

SICC-A series are applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling.

SICC-W series water applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling.

SG-14/24/24T series granulators operate in super low speed to cut materials into well-proportioned granules. There are least dusts produced in the cutting process. Multiple security devices ensure high safety grade; automatic reverse running function ensures continuous operation. This series of screenless granulators are suitable for granulating hard and thick materials. For SG-24T series, there are two gear motors and two cutting chambers to work simultaneously. It can not only granulate the sprues and waste material, but also has an effect on long and thin or tougher sprues materials.

SG-24E series “Standard” screenless granulators are suitable for instant recycling or granulating hard and thick materials. With “Standard” style appearance and compact size, they feature low rotating speed, low abrasion and super soundproof. Unique cutting blades design ensures well - proportioned granules and minimal amount of dusts. Easy for material cleaning and safe to operate. The unique transmission design cuts the cost greatly.

SG-16/20 series low-speed granulators have paddle blades and staggered blades design for customer selection. They are mainly used for granulating sprues or rejects fed by pickers or belt conveyors beside the moulding machines. They feature low speed, high torque, low noise and dust level, excellent quality and performance. Machines are built to comply with CE safety standards.

SG-23/30/36 series sound - proof central granulators are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding or extrusion lines. The machines feature optimized structure, easy operation, and quick blade replacement. Staggered rotating blades can easily grab and cut through materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.This granulator has various models with wide application range to meet different customer’s demand.

SG-23/30/36 series sound-proof central granulators are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding or extrusion lines. The machines feature optimized structure, easy operation, and quick blade replacement. Staggered rotating blades can easily grab and cut through materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.This granulator has various models with wide application range to meet different customer’s demand.

SG-50 series granulators are applicable to granulate various kinds of plastic materials from injection moulding, blow moulding or extrusion moulding. This series feature compact design, easy operation and quick blade replacment. It is great in motor power, cutting chamber size, and output capacity. Gradually inclined cutting and integrated power design offer a better cutting effect and a lower noise level.

SG-43 series are suitable for centralized recycling of waste and rejected parts form injection, blowing molding and extrusion lines. This series feature compact design, easy operation and quick blade replacement. Gradually inclined cutting and integrated power design offer a better cutting effect and a lower noise level ensures low energy consumption.

SG-70 series granulators are applicable to granulate various kinds of plastic materials from injection moulding, blow moulding or extrusion moulding. This series feature compact design, easy operation and quick blade replacement. It is great in motor power, cutting chamber size, and output capacity. Gradually inclined cutting and integrated power design offer a better cutting effect and a lower noise level.

SG-23/30E series granulators have no significant differences with the standard model in construction and operability. The granulators feature quick blade change. They are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding and extrusion machines. Staggered blades can easily grab and granulate the materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.

The newly developed SGS series shredders from our company is specially designed to solve the problem of "traditional granulator can’t recycled waste material ". It absorbs the advantages from craft brother company and the cutter of shredder takes the lead in adopting V-shape arranged rotor cutting technology, which could be widely used for cutting all kinds of plastic piece, plastic with thin shell, foam mattress, packaging belt, rag, plastic portiere, leather, all kinds offodder, matchwood, wood flour, paperboard, textile, medical waste, tyre of minicar etc. SHINI. It can shred extra thick, tough and large solid materials. It can be applied in wide range, for example, recycling all kinds of materials, such as plastic, rubber and wood. The waste materials which are produced by the injection molding, blow moulding or extrusion moulding are also included.

SGS-80S series of single-shaft shredders is an newly developed product line by Shini. It can shred extra thick, tough and large solid materials. It can be applied in wide range, for example, recycling all kinds of materials, such as plastics, rubber and wood. The waste materials which are produced by the injection molding, blow moulding or extrusion moulding are also included.

SGF-29 series are applicable for granulating and recycling plastic films. After pressed toughly by the material feeding rollers, films are pushed and cut into granules for reusing. They feature easy operation, excellent quality, reasonable price and compact in size. Infinitely adjustable rotating speed reduces the dust, noise and abrasion of knives. Various kinds of safety devices meet the requirement of CE.

Shini manufactures five types of belt conveyor as follows under technical license from a leading european manufacturer.

PNL series conveyors feature reliable performance and ease of operation and are suitable for use with CB or SV series conveying or as stand-alone unites.

PNL-MS series belt conveyor with metal detector is a device which can detect the metal contained in the material during conveying and simultaneously activate the alarm.

CB series conveyors feature reliable performance and ease of operation and are suitable for conveying sprues or finished products to a higher level beside the moulding machine.

CBD series conveyors feature reliable performance and ease of operation and are suitable for conveying finished products to separator to separate product from its connecting sprues. The height is adjustable.

SV series conveyors feature reliable performance and ease of operation and are suitable for conveying finished products fed from robots to a lower level.

SHINI is among the world leaders for plastic auxiliary equipment in complete solutions for granule handling and the management of various utilities. SHINI has progressively developed full range of products and systems, which designed to meet the needs of every customer. From large complex, centralized systems and by the press units.

The central control stations adopt SIEMENS PLC for conveying materials, monitoring the system and alarming with super and perfect function. This system has a standard device (S7-200PLC) that can support conveying up to 36 molding stations. When equipped with S7-300PLC, it can achieve central monitoring of each station by modularization and fulfill enhancement of molding machines by expansion modularization. It has been designed and built to comply with CE standards ensuring highly safe operations. Colorful touch-screen interface makes operation much easier.

The central vacuum generator provides high level of vacuum (negative pressure) power. This machine adopts high performance blowers (single- or double-stage) or Roots blowers as its core power. It features durability, powerful, and long service life etc. to ensure continuously loading. Besides, this series offer more than 11 models with maximum horsepower up to 15 HP suitable for different system applications.

The central safety filters adopt a large dust collector to remove the dust and fines from the conveying material so that can effectively protect blower and prolong its service life. Self-cleaning function ensures effective cleaning of filter core depending on a pre-set timing cycle that can avoid manual cleaning inconvenience. Vacuum breaking valve is fitted to reduce loading time and hence accelerate the material conveying capacities.

Central hopper receivers are a necessity for material loading system. There are 2 types of hopper receivers: hopper mount and machine mount. The hopper mount type can be mounted on top of the drying hopper, the machine mount type can be installed on feed-throat of the moulding machine directly. Vacuum separating valve is fitted on top of the hopper to form a systematic conveying and loading integration.

The function of the distribution branches is to distribute materials to the corresponding hopper receivers. They here 5 models of SMDS series, each equipped with quick release couplings, so the loading and unloading of material are convenient. The stainless steel is adopted for build the to eliminate material contamination.

With this drying demand and the development on plastic industry, SHINI Group provides a series of secured and reliable drying and dehumidifying technologies for PET molding and other PET product manufacturer.
SHINI Group’s PET system has leading technologies in the industry to meet various application needs.

The SS series robot is designed for rapid and precise removal of sprue or runner from injection moulding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for injection moulding machine under 250t clamping force.

The ST1 Series robot is designed for rapid and precise removal of sprue and products from injection molding machine, and place them at desired locations. Standard and telescopic arm(s) are selectable according to the application of two plate mold, three plate mold or hot runner system. Stacking function provides 2 stop points in X and Y axis, multiple stop points in Z axis. Suitable for injection molding machine under 850T clamp force.

The ST3 Series robot is designed for rapid and precise removal of products from injection molding machine, and place them at desired locations. Standard and telescopic arm are selectable to cooperate with 2 plate mold or hot runner system. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 3600T clamp force.

The ST5 Series robot is designed for rapid and precise removal of sprue and products from injection molding machine, and place them at desired locations. Standard and telescopic arms are selectable to cooperate with 2 plate mold, 3 plate mold or hot runner system. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 3600T clamp force.

The Vertical Transporter of SVT series are used for taking over the products of the robot, enhancing its efficiency and protecting operator’s safety. This series can be connected with robot signals, and precise catch and protection of products. There is a filter and fast connection is provided to facilitate the operation. The vertical stroke can be adjusted according to height of the injection moulding machine and robot.

SC Series declined belt conveyor is mainly used for the delivery of products, it can effectively enhance the working efficiency and protect the product appearance. It also can be connected with outside signal, and realise automation with adoption of robots.

When impeller is revolving, the air among impeller will be speedup by running pressure along and bypass blade. After the air being forced to enter outboard cycle, it'll come back to the blade base by pressure gap and be speedup. In a while, the ambient air is running in screw direction to reach increasing pressure effect. When the air worked into exhausting process, the pressure is exceeding system pressure and the gas will be discharged outside.

TB series adopt aluminum ally for casting molding, convenient installation and easy operation. Segregated design for motor and blower body, which can be heat-resistant up to 120℃. They are small size with low noise, and the air inlet flow can be adjustable. NSK brand bearings enjoys long life-span; Turbo blower is suitable for wide range of voltage motor with frequency as 50/60 Hz.

With the inertia, Liquid acquires the energies to pressure intensity through the high-speed rotation of impellers. To avoid the cavitation, both pump body and water inlet should be filled with water before starting pump. Due to the inertia effect, the rotating water is forced to flow out as impellers twirl. Once water flows out of pump, vacuum is created at the center of impellers. Then water sources are pressed into water inlet through pipe network under the effect of atmospheric pressure or water pressure and the successive pumping can be realized in such a circulation.