When impeller is revolving, the air among impeller will be speedup by running pressure along and bypass blade. After the air being forced to enter outboard cycle, it'll come back to the blade base by pressure gap and be speedup. In a while, the ambient air is running in screw direction to reach increasing pressure effect. When the air worked into exhausting process, the pressure is exceeding system pressure and the gas will be discharged outside.

TB series adopt aluminum ally for casting molding, convenient installation and easy operation. Segregated design for motor and blower body, which can be heat-resistant up to 120℃. They are small size with low noise, and the air inlet flow can be adjustable. NSK brand bearings enjoys long life-span; Turbo blower is suitable for wide range of voltage motor with frequency as 50/60 Hz.

With the inertia, Liquid acquires the energies to pressure intensity through the high-speed rotation of impellers. To avoid the cavitation, both pump body and water inlet should be filled with water before starting pump. Due to the inertia effect, the rotating water is forced to flow out as impellers twirl. Once water flows out of pump, vacuum is created at the center of impellers. Then water sources are pressed into water inlet through pipe network under the effect of atmospheric pressure or water pressure and the successive pumping can be realized in such a circulation.